※Rooftop tower and antenna mast set
YS5
Stay wire:3mmx40m / Turn buckle:4 pieces(for 3mm diameter) Wire clip:32 pieces
Screw eye bolt:4 pieces(antenna mast)
Length:5.0m / Step:5 Aluminum
Weight:4.2kg(rooftop tower)
Height:84.5cm / Foot span:74cm
Max.load:400kg / Weight:5.47kg
FP8
Length:7.25m 4 stages,aluminum
FP10A
Length:9.07m 5 stages,aluminum
FP12
Length:10.92m 6 stages,aluminum
FP14
Length:12.8m 7 stages,aluminum
FP5
Length:5.0m 5 stages,aluminum
※Base holders
FB5
Height:1.15m / Bottom width:95cm
Max.vertical load:400kg / Weight:6.5kg
Stay wires for antenna pole
FW316S
3mm stay wire 160m, turn buckles 12 pieces, wire clips 96 pieces
Portable Telescopic Antenna Mast
DAP450
Length: approx. 1.4m (minimum) to approx. 4.5m (maximum)
Weight: Approx. 1.4kg
Pipe diameter: φ22mm(upper)-φ34mm(lower), 4 sections telescopic type
Maximum weight load: approx. 8kg (in perpendicular setting and calm)
Accessories: Stay rope 30m, Base bracket for coaxial connector, Fix bolt, Camera screws (all screws), Rock nut.
Portable Telescopic Antenna Mast
DAP600
Length: approx. 1.5m (minimum) to approx. 6.0m (maximum)
Weight: Approx. 2.3kg
Pipe diameter: φ26mm(upper)-φ42mm(lower), 5 sections telescopic type
Maximum weight load: approx. 8kg (in perpendicular setting and calm)
Accessories: Stay rope 30m, Base bracket for coaxial connector, Fix bolt, Camera screws (all screws), Rock nut.
Tripod Mast Stand
AS603
Length: Approx. 85cm (Folding)
Weight: Approx. 2kg
Max. load capacity: Approx. 20kg (when horizontally setting and no wind)
Max. legs spread width: Approx. 1m
Pole diameter accepted: Pipe φ34 and Pipe φ42
Attachments: adaptor for Pipe φ34 and φ42, wrench
MOUNT BRACKET FOR TRIPOD
TRS3
Weight: 240g
Connector for antenna side: M-J
Connector for cable side: M-J
Butterfly bolt: M5
Screw hole for camera mounting: 1/4 inch
Coaxial cable: 3D-2V 20cm
※Butterfly bolt for grounding is included.
GROUNDING WIRE
IVES10
Length: 10m
Y terminal diameter: 5mm-5.3mm