※Rooftop tower and antenna mast set
YS5
Stay wire:3mmx40m / Turn buckle:4 pieces(for 3mm diameter) Wire clip:32 pieces
Screw eye bolt:4 pieces(antenna mast)
Length:5.0m / Step:5 Aluminum
Weight:4.2kg(rooftop tower)
Height:84.5cm / Foot span:74cm
Max.load:400kg / Weight:5.47kg
FP8
Length:7.25m 4 stages,aluminum
FP10A
Length:9.07m 5 stages,aluminum
FP12
Length:10.92m 6 stages,aluminum
FP14
Length:12.8m 7 stages,aluminum
FP5
Length:5.0m 5 stages,aluminum
※Base holders
FB5
Height:1.15m / Bottom width:95cm
Max.vertical load:400kg / Weight:6.5kg
Stay wires for antenna pole
FW316S
3mm stay wire 160m, turn buckles 12 pieces, wire clips 96 pieces
FW312S
3mm stay wire 120m, wire clips 36 pieces
Portable Telescopic Antenna Mast
DAP450
Length: approx. 1.4m (minimum) to approx. 4.5m (maximum)
Weight: Approx. 1.4kg
Pipe diameter: φ22mm(upper)-φ34mm(lower), 4 sections telescopic type
Maximum weight load: approx. 8kg (in perpendicular setting and calm)
Accessories: Stay rope 30m, Base bracket for coaxial connector, Fix bolt, Camera screws (all screws), Rock nut.
Portable Telescopic Antenna Mast
DAP600
Length: approx. 1.5m (minimum) to approx. 6.0m (maximum)
Weight: Approx. 2.3kg
Pipe diameter: φ26mm(upper)-φ42mm(lower), 5 sections telescopic type
Maximum weight load: approx. 8kg (in perpendicular setting and calm)
Accessories: Stay rope 30m, Base bracket for coaxial connector, Fix bolt, Camera screws (all screws), Rock nut.
Tripod Mast Stand
AS603
Length: Approx. 93cm (Folding)
Weight: Approx. 2kg
Max. load capacity: Approx. 20kg (when horizontally setting and no wind)
Max. legs spread width: Approx. 1m
Pole diameter accepted: Pipe φ31 and Pipe φ42
Attachments: adaptor for Pipe φ31 and φ42, wrench
Mast Base for Mobile Tire
TMB
Dimension:185(W)x535(L)x420(H)mm / Weight:6.65kg
Possible Mount Mast Diameter:φ25-50 (mm)
Possible Mount Weight:10Kgs.(including the Mast weight)